Key models

Photodiode power sensors

Photodiode Sensors

Manufacturer
LaserPoint
Source
LaserPoint datasheet

Sensitive, fast measurement of low CW laser power in the µW to mW range.

Sensors that convert incident photons into carriers measured as voltage or current; with low noise and high sensitivity they suit low power measurement of CW lasers. Compared with thermal sensors they have a limited spectral range and low saturation (approximately 1mW/cm²), so attenuating filters are often needed at higher powers. The series measures up to 500mW from UV to near IR (200nm to 1800nm) and ships with a Calibration Certificate traceable to NIST and PTB.

ItemSpecification
Power range (family)10 µW - 500 mW
Spectral range200 - 1100 nm (Silicon), 800 - 1800 nm (Germanium)
PD-50-D9-IR100 µW - 40 mW, 1 µW resolution, 800 - 1800 nm, Germanium, ± 7% @800-1000nm / ±3% @1000-1650nm / ±5% @1650-1800nm
Useful aperture9.5 mm
Response time (0-90%)0.25 sec
Noise equivalent power (NEP)10 nW - 100 nW
Fiber adaptersSMA, ST, FC, LC, SC
ConnectivityDB15 to Plus2 Meter; U = USB, R = RS-232 (PC-PLUG series)

Applications

  • Low power measurement of CW lasers
  • Power measurement requiring fast response
  • Measurement of fiber-coupled sources

Variants

  • PD-50-D9-UV
  • PD-50-D9-VIS
  • PD-50-D9-IR
  • PD-500-D9-VIS

Specifications and options may change with manufacturer revisions; we confirm against the latest datasheet when quoting. SHINHOTEK is the exclusive distributor of LaserPoint in Korea.