Excimer versus picosecond and femtosecond laser processing: wavelength, pulse width, heat, applications
- By
- Shinhotek engineering
- Published
- 2026-11-12
Both are used for precision processing with little thermal damage, but by different means. Excimer lasers rely on short wavelength, ultrafast lasers on short pulse width.
Excimer lasers. ArF 193 nm, KrF 248 nm and XeCl 308 nm ultraviolet in nanosecond pulses. The high photon energy is absorbed at the surface even by polymers, glass and ceramics that transmit visible light, breaking bonds photochemically (ablation). Large pulse energy and a wide beam suit mask projection, transferring a whole pattern per pulse. Typical uses: polyimide micromachining, low-temperature polysilicon annealing for displays, glass surface treatment and micro-holes in medical devices.
Picosecond and femtosecond lasers. 1,030 nm fundamental with 515 and 343 nm harmonics, in sub-picosecond pulses. The pulse is shorter than the material's thermal diffusion time, so material is removed before heat spreads ("cold ablation") with a very small heat-affected zone and few micro-cracks. Used for processing inside transparent materials, glass cutting, thin-film patterning and cutting medical parts such as stents. Pulse energy is small, but high repetition rates with a scanner deliver throughput.
| Item | Excimer | Picosecond / femtosecond |
|---|---|---|
| Wavelength | 193, 248, 308 nm UV | 1,030, 515, 343 nm |
| Pulse width | Nanoseconds | Picoseconds to femtoseconds |
| Removal | Photochemical bond breaking | Removal before heat diffuses |
| Patterning | Mask projection | Direct write with a scanner |
| Heat-affected zone | Small | Very small |
| Strength | Large areas, high pulse energy | Inside transparent materials, fine features |
How to choose. If the material absorbs UV strongly and the same pattern repeats over a large area, excimer wins on throughput. If thermal effects must be minimal or features must be written inside transparent material, choose ultrafast. Trial processing that compares edge quality and speed directly is the surest test.
Shinhotek supplies MLase compact excimer lasers and Spark Lasers picosecond and femtosecond lasers and supports sample trials.
