Galvo scanner and control board guide: aperture, f-theta focal length, RTC control
- By
- Shinhotek engineering
- Published
- 2026-11-12
A galvo scanner steers the laser in X and Y with two galvanometer-driven mirrors. It sits in marking, cutting, welding and additive systems, and its performance comes from three choices: aperture, f-theta focal length and the control board.
Aperture trades spot size against speed. A larger aperture allows a smaller focused spot at a given focal length, but the heavier mirrors accelerate and settle more slowly. Industrial heads run from about the 10 mm class to the 30 mm class; micro-machining favours large apertures, fast marking small ones.
Focal length sets field and spot. A longer f-theta focal length widens the scan field and working distance, but the focused spot grows in proportion. The spot diameter scales roughly with wavelength × focal length × beam quality (M²) ÷ input beam diameter, so field and spot cannot both be minimised; start from the workpiece size.
2D and 3-axis. A 2D head relies on an f-theta lens for a flat focal plane. A 3-axis (dynamic focus) head moves a lens before the mirrors to shift the focus in z, enabling large fields or curved and stepped surfaces without an f-theta lens.
The control board ties laser and mirrors together. Real-time boards such as SCANLAB's RTC series handle mirror commands, laser gating and pulse synchronisation, delay compensation during acceleration, and lens distortion correction tables. Driving the head with raw analogue signals produces overheated corners and shifted start points.
| Factor | Larger | Smaller |
|---|---|---|
| Aperture | Smaller spot, slower | Faster, larger spot |
| Focal length | Wider field and working distance, larger spot | Smaller spot, narrower field |
| Mirror coating wavelength | Reflectivity holds at the design wavelength | Loss and heating when mismatched |
Wavelength and coatings. Mirror and lens coatings must match the laser (1,064, 532, 355 nm, 10.6 µm). A green or UV head used with an infrared laser loses reflectivity and heats up.
Shinhotek configures SCANLAB scan heads, control boards and f-theta lenses for the process and supports installation and software integration.
